pretty much, Ive done this by also not running a remote wire at all but merely putting small wire from the main power to the switch and then to the remote input on the amplifier, any simple two prong switch will work but if you can find one that is encased it is better since you dont have to worry about accidently grounding the switch, if the wires are bare on the switch even a loose screwdriver can lead to a ground one the power switch and prolems with frying you amplifier.
"If you get hit and it hurts hit him back you not knocked out yet."-Joe Doerksen
The Toxic Terrors (FFL)
Georges St. Pierre*Sarra McMann*Pat Curran*Patricio Freire*Uriah Hall
NP FFL Team Toxic Challenge
Fabricio Werdum*Gilbert Melendez*Rick Hawn*John Dodson*Urijah Faber